Access Automation

Upgrading an Old Gate Motor: What a D10 Smart Motor Adds

Old motors still open gates, but a D10 smart motor adds app control, heavier gate capacity and real diagnostics. When to upgrade and what you get.

  • By Freelance Electronics
  • 18 November 2026
  • 3 min read
Upgrading an Old Gate Motor: What a D10 Smart Motor Adds

If your gate motor groans like it has a back problem, it might be time. Old motors still move gates, but a modern D10 gate motor does a lot more than push steel.

Quick answer

The D10 SMART+ handles gates up to 1000 kg and adds Wi-Fi app control, up to 1500 users and phone alerts. If your motor is old and needs regular repairs, upgrading usually beats fixing it.

Signs your gate motor needs replacing

  • It struggles, slows or stops halfway
  • Repairs are becoming a monthly expense
  • Spare parts are hard to find
  • Everything still depends on a remote

None of these mean disaster tomorrow. Together, they mean you are paying to keep old technology alive.

Sliding gate rack and track laid during a gate motor installation

Old motor vs D10 smart motor

FeatureOlder motorD10 SMART+
Gate weightOften lighter gatesUp to 1000 kg
ControlRemotes onlyRemotes plus phone app
UsersLimited remote memoryUp to 1500 users
DiagnosticsGuessworkStatus and alerts on your phone

Your gate is the front door you use most. It deserves better than a tired motor.

What the D10 actually adds

App control built in

The SMART+ range has Wi-Fi on board, so you can open, close and check your gate from your phone without bolting on extra modules. Share access with family, then remove a user in seconds when a tenant or domestic worker moves on.

Muscle for heavier gates

South African steel gates are rarely light. The D10 runs on 24V and is built for heavy gates, so it is not straining every day.

Safety that thinks

Collision sensing stops the gate if it hits an obstacle, which matters with kids, pets and car bonnets around.

Gate motor controller board inside a sliding gate motor during an upgrade

Pro tip

A new motor on a worn track is like new tyres on a bent rim. Have the rack, wheels and track checked too.

Heads up

Lighter gates may suit the 12V D5 EVO instead. Gate weight, not hype, should decide. Specs are on Centurion’s website.

See how we handled a smart D10 upgrade, explore our access automation service, add an intercom, then request a quote.

Frequently asked questions

What is the difference between a D5 and D10 gate motor?

The D5 EVO suits gates up to about 500 kg on 12V. The D10 handles up to 1000 kg on 24V, so it copes better with heavy, busy gates.

Can I control a D10 gate motor from my phone?

Yes. The D10 SMART+ has built-in Wi-Fi and works with Centurion’s app. Older motors often need an add-on module.

Should I repair or replace my old gate motor?

If it is over ten years old, needs regular repairs or parts are scarce, replacing it is usually better value.

How much does it cost to replace a gate motor?

It depends on the motor, gate weight, batteries and any track repairs. A site visit gives you an accurate quote rather than a guess.

Free site assessment

Not sure what your property needs?

Tell us about your gate, alarm, cameras or intercom. We will recommend a setup that fits your property and your budget, with no jargon and no hard sell.

Freelance Electronics logo
Freelance Electronics installs and supports security systems designed for everyday use. We handle CCTV, alarms, access control, gate and garage automation, intercoms, electric fencing, off-site monitoring, and perimeter security for both homes and businesses.
© 2026 Proudly Developed and Hosted by
Webdevs.
Freelance Electronics cc. 2026 All Rights Reserved.
Secret Link